1. CNC Machining for High-Performance Plastics

Our CNC Machining for Engineering Plastics ensures excellent dimensional control, surface finish, and structural integrity across a variety of polymer-based materials. From chemical-resistant PEEK to wear-resistant Delrin, we adapt processes for material characteristics.

• Material support: PEEK, PTFE, Delrin (POM), PA6, PC, ABS, PPSU
• Tolerances up to ±0.02mm (depending on plastic type)
• Toolpath strategy tailored to reduce heat and warping

2. Why Plastic CNC Requires Different Expertise

● Material-Specific Cutting Parameters

We fine-tune spindle speeds, feed rates, and depth of cut to reduce melting, edge burrs, or internal stress in thermoplastics.

● Thermal Expansion Control

For hygroscopic materials like Nylon or low-melting plastics like ABS, we pre-dry, pre-cut, and rest parts post-machining to maintain final accuracy.

3. Case Study: PEEK Medical Isolation Blocks

Project Description

A US-based lab equipment supplier required 1,000 pcs of PEEK electrical insulators with internal slots and edge chamfers. Tolerance: ±0.02mm; Surface: smooth, matte, no tool marks allowed.

Our Solution

• ① Material Handling: Pre-dried PEEK rods stored in humidity-controlled cabinets.
• ② Machining Strategy: Multi-step rough + finish passes to reduce heat buildup and avoid shrinkage.
• ③ Edge Management: Custom tools used to avoid micro-chipping on sharp corners.
• ④ Quality Control: Visual check + dimensional inspection on key slots and hole locations.
• ⑤ Packaging: Anti-static bags used to protect surfaces from dust or deformation.

4. Common CNC Plastic Parts We Deliver

• PEEK electrical isolators and medical-grade plates
• PTFE seals, valve seats, and chemical containers
• Delrin gears, pulleys, and mechanical wear parts
• Polycarbonate covers and viewing windows

5. FAQs for CNC Plastic Machining

● Will the plastic deform during CNC machining?

We manage temperature, material rest time, and fixturing to minimize deformation, especially on large flat parts or long, thin components.

● Can you guarantee burr-free finishes?

Yes. We use sharp carbide tools, low-vibration setups, and post-machining deburring to ensure smooth, clean edges.

● What if I need both metal and plastic components?

No problem—we can handle mixed material BOMs and match plastic-to-metal interfaces during machining for proper assembly fit.

6. Your Design, Our Responsibility

Whether your project involves chemical resistance, high-temperature performance, or biocompatibility, our team ensures confidentiality, compliance, and clear technical communication throughout.

7. Request a CNC Quote for Engineering Plastics

Prev: Aluminum CNC Machining for Enclosures

Next: CNC Machining for Copper Components